0

Create a TV Scene

Here we will show you what a TV Scene can do and how to set it up.

Control a group of TV devices

Example: Turn on your TV and media player and switch to the right AV input—all with a single button.

 


Combine controls for multiple AV devices on one screen

Example: Browse content on your media player and adjust volume through your AV receiver on one unified control screen.

 


Add control of smart home devices to a TV Scene

Example: Dim the lights and stop the music when you start a “Watch Movie” scene.

 

 


Important note about controlling infrared devices

When activating a TV Scene, all infrared-controlled devices need to be visible by Smart Remote’s infrared transmitter. 

 


Easily fix a TV Scene that is not working properly

If a device is not responding to your commands or is out of sync with other devices (e.g. TV turns off when everything else turns on), swipe left to access a screen to fix the state of that device. 


Here is how to create a TV Scene:

Part I: Create a TV Scene using the app

Steps

  1. Make sure your phone is connected to the same Wi-Fi network as Smart Remote

  2. Launch the Smart Remote app and go to the "TV Scenes" tab

  3. Select “Create a TV Scene”

  4. Enter a name for the TV Scene you want to create

  5. If desired, you can change the icon for your TV Scene by tapping the icon next to the name you entered

  6. Continue creating your scene by selecting the AV devices you want to control and selecting answers to these questions in the app:

    1. Which display would you like to use?

    2. Which input/source would you like to use?

    3. Is your source connected via an AV receiver?

    4. Which device do you use to control sound?

  7. You also have the option to add Home Scenes to add control of smart home devices to a TV Scene when your TV Scene is turned on and off:

    1. When your TV Scene is turned ON do:

    2. When your TV Scene is turned OFF do:

  8. Press “Save” and read the information displayed in the app

Part II: Record the TV Scene using Smart Remote

Steps

  1. To finish creating your TV Scene, follow the instructions on Smart Remote.

  2. The first thing you will be asked to do is press the power button on Smart Remote to turn on all the devices you added to the TV Scene. Make sure you point Smart Remote at any infrared (IR) devices you have in the scene and that there is a direct line of sight between Smart Remote and each IR device.

  3. Make sure all your devices are powered on. If not, press the power button to turn on the device or devices that are not turned on. When you verify that all the devices in the TV Scene are on, press “Everything is ON”.

  4. Select the right inputs for each of your devices by pressing the right and left arrows next to the name of each device. When all your devices have the right input, you should see and/or hear input/source device you selected.  When this happens, press “Inputs are OK”.

  5. Smart Remote has now recorded all the required input settings to activate your TV Scene and your TV Scene has been successfully added. Press “finish” to exit.

You now have access to your TV Scene in Smart Remote’s carousel. To create a location for your TV Scene list in Point Mode, long press on the TV Scene list in the carousel and follow the on-screen instructions.


Related articles


Troubleshooting articles

Reply Oldest first
  • Oldest first
  • Newest first
  • Active threads
  • Popular
Browse Articles

Still have questions?

Send us an email and we'll help out. Contact us