Each Room Sensor works with 2 AA Lithium Batteries that can be replaced at any time. If and when a Room Sensor battery level is less than 20% it will emit a red flash from the LED on the face. You can also check the battery level of the Room Sensors associated with your Smart Remote by following the steps below.

1. Make sure you are in fix mode by swiping down from the top of Smart Remote screen to reveal the Carousel.

2.  Make sure you have activated Point Mode on your Smart Remote (you won't have access to Room Sensors battery level if you haven't)

3. Go to the settings menu by swiping left on the carousel

4. Select "Point Mode"

5. Here you’ll be able to see the battery level status of each individual Room Sensor.

Related articles

• Reset Point Mode calibration
• Activate Point Mode and Locate items