0

Set up Point mode (Smart Remote X only)

READ ME:

  • Smart Remote works on a horizontal plane, use Point Mode to locate your TV scenes and devices located outside your stacked media cabinet.
  • Grouping devices closer than 6ft (2m) between one another or stacking them vertically is not recommended, they will not be recognized by Point Mode.
  • If your media is set up in a cabinet, Point Mode should only be used to control your TV scenes, which should be located at your television for control of your entertainment center.
  • For closely placed devices outside of your media cabinet (such as lights and speakers) create groupings by locating them all at the same location.

Step 1 - Install your Room Sensors to create a Smart Zone

Step 2 - Setting Locations for Devices/TV Scenes to be used with Point Mode

Once your sensors are calibrated, you are ready to set locations for your devices and TV Scenes. You must locate at least 2 devices to enable Point Mode.

For your TV Scenes and other devices you wish to control with Point Mode:

  1. Tap and hold the icon at the top of the carousel of the device you wish to locate.

  2.  Once “Locate” appears on your Smart Remote, hold it at most 6 inches from whatever you wish to locate, and confirm.

 

The device is now located and available for control when Smart Remote is in Point Mode. Repeat this with each of the devices you wish to control with Point Mode. 

For those who prefer not to create TV Scenes: if you have several devices in close proximity to each other, we recommend you locate all of them in the same spot. This will allow Smart Remote to display those devices in the carousel when pointing at their location.

Learn how to create TV scenes here

Learn how to group devices here

Step 3 - Using Point Mode

After you have located at least two devices, you are ready to use Point Mode. 

Swipe up on the line at the bottom of your Smart Remote’s carousel to activate Point Mode. Then point at your desired device and Smart Remote will automatically display it’s controls.

Now enjoy simple and easy access to all your located devices. If you want to customize the controls that appear on your Smart Remote, visit the screen layout configurator for any of your registered devices in the “Devices and Services” portion located within the app. 

Learn how to customize here.



Troubleshooting articles

Browse Articles

Still have questions?

Send us an email and we'll help out. Contact us